|
Total Chaos is a model of Chaos 2, and is also very powerful, as you
would expect. It is one of my older robots, and therefore is more of a model than a fighting robot in it's own right. It has a polystyrene shell, and a chassis made from polystyrene and foamboard. The side armour is
2mm thick, whilst the front armour is only 0.25mm thick. I needed to bend it round the curves at the front. The rear clear panel is made from 0.75mm clear PVC.
The weapon is a flipper. It is made from polystyrene
again, and is powered by two 16mm bore single acting actuators at 100psi. This flipper will also self right the robot. The drive is older as well, using the clearbox motor and gearbox. These tend to break very
quickly, and so will be replaced with home built ones. The robot carries three batteries, one 6v for the drive and two 12v for the valve.
This robot has been externally finished, and just needs fitting out. Here
are some pictures:
|
